<address id="dtppn"><noframes id="dtppn">
<th id="dtppn"></th>

    <listing id="dtppn"></listing>
    <track id="dtppn"></track>

        <pre id="dtppn"></pre>

          <noframes id="dtppn">

          <ruby id="dtppn"></ruby>

          <pre id="dtppn"></pre>

          <delect id="dtppn"></delect>

          3 - 5 Gallon Pet Bottle Semi-automatic Blowing Molding machine

          Your are here: Home > Products > Bottle Blow Molding Machine > Semi-automatic Bottle Blowing Machine

          • Bottle Blow Molding Machine - Semi-automatic Bottle Blowing Machine
          • Bottle Blow Molding Machine - Semi-automatic Bottle Blowing Machine
          • Bottle Blow Molding Machine - Semi-automatic Bottle Blowing Machine
          • Bottle Blow Molding Machine - Semi-automatic Bottle Blowing Machine

          Bottle Blow Molding Machine - Semi-automatic Bottle Blowing Machine

          Semi-automatic Bottle Blowing Machine

          Bottle Blow Molding Machine  
          • Bottle Blow Molding Machine - Semi-automatic Bottle Blowing Machine
          • Bottle Blow Molding Machine - Semi-automatic Bottle Blowing Machine
          • Bottle Blow Molding Machine - Semi-automatic Bottle Blowing Machine
          • Bottle Blow Molding Machine - Semi-automatic Bottle Blowing Machine

          PRODUCT PARAMETERS

          Semi-Automatic Bottle blowing machine is suitable for blowing PET bottles of various shapes, volume from 50 ml to 2000 ml, wide application for blowing mineral water bottles, soda bottles, cola bottles.

          Main technical parameters:

          TYPE ITEM UNIT SW-50||B/MC-880
          TECHNICAL DATA
          CONTAINER Product material   PET/PC/PP/PE
          Container volume L 0.1-2.5(2-cavity) 3-6(1-cavity)
          Theoretical output Pcs/hr 0.1-2.5L:850 3-6L:400
          Preform length mm 360
          Preform inner diameter mm φ180
          MOULDING Max.mould plate dimension(L×W) mm 420×500
          Max.mould thickness mm 250
          Clamping force KN 150
          Mould opening stroke mm 240
          AIR COMPRESSOR High pressure compressor M3/Mpa KW ≥0.63/3.0 11
          Air pressure for blowing Mpa 2.0-3.0
          MAIN MACHINE ELECTRICITY power KW 6
          Voltage/Frequency V/Hz 380-240-110/50-60(3-phase)
          MACHINE SIZE AND WEIGHT Main machine(L×W×H) M 1.55×0.62×2.00
          Main machine weight T 0.6
          Heater(L×W×H) M 1.10×0.5×1.16
          Heater weight T 0.22
          High pressure compressor(L×W×H) M 1.90×0.75×1.50
          Air filters kg 10×2pcs
          SAFTY Auto-emergency alarm Safety inter-locking Device

          PRODUCT CHARACTERRISTICS

          1. New double crank four pull-up bar clamping structure, cross balance fixed slide

          2. Sealing, stretch adapts parallel bars (CIS) design, combined, good for products molding

          3. Advanced gas path design, single, dual air intake can be; low-pressure mechanical clamping, sealing, stretching; high pressure blowing molding

          4. Programmable PLC controller, automatically control, microcomputer touch screen convenient operation

          5. Bottle embryo heated by infrared, controllable constant pressure control, so as to achieve the best blowing precision

          6. Low cost :Low consumption of electrcity,air and water.

          7. No contamination:Closed production zone,good self-cubrication system avoid contamination.

          SCOPE OF APPLICATION

          It is suitable for producing PET plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc.

          CERTIFICATE

           

          PACKING

           

          SUBMIT

          Copyright ? 2017 Zhangjiagang Baiji Machinery Co., Ltd.?All Rights Reserved.
          中国特级毛片www免费,xxxx国产,caoPorn超碰小说,伊人九九热_首页